BackPutz-technik products ltd have developed the following products for the New Zealand construction environment.
Name Description
PT 100
Adobe finish for exterior base or mesh coated surfaces, min 1mm.
PT 101
A plastic trowel finish over all base or mesh coated surfaces or directly over 7.5mm fibre-cement sheet, min 1mm. Also suitable as a texture spray.
PT 102
A medium sponge finish for exterior base or mesh coated surfaces, min 1.5mm. Also suitable as a texture spray.
PT 103
A 2 or 3mm scratch finish.
PT 104
A 2 or 3mm drag finish.
PT 200
A robust render suitable as a basecoat on concrete block or AAC, 5—20mm.
PT 300
A general purpose adhesive render used as a basecoat over polystyrene (EPS) and smooth surfaces such as precast and tiltslab or painted surfaces, min 3-4mm on polystyrene. Can be used to x polystyrene sheets to all common good bearing wall backgrounds.
PT 320
A 2—4mm mesh coat render for use as a mesh or straightening coat over PT 300 or PT 325.
PT 325
A basecoat render that adheres directly to bre-cement sheet, min 5mm.
PT 350
A bonding and straightening plaster used in thin coat plaster solutions for min 7.5mm fibre-cement sheet. Retarded hydration allows this to be used as a skim coat over high suction substrates, min 1mm.
PT 350 AAC Block Render
Mineral Plaster on autoclaved aerated concrete block wall.
PT 351
A jointing compound used with rebated 7.5mm fibre-cement sheets.
PT 400
A gypsum/lime whiteset render for internal walls and ceilings (concrete block, AAC, Gib Board, bre-cement sheet).
PT 402
A gypsum/lime whiteset render for high level polished internal finishing
PT 451
An adhesive whiteset basecoat over polystyrene , precast or painted surfaces.
PT 600
An insulating plaster for blockwork and fibre-cement sheet.
SMK 1311
A silicone microemulsion used as an impregnating waterproofing agent.
